Contus 3-part slide bearing
Contus
€1.95*
Prices incl. VAT plus shipping costs
Currently not available, please sign up to get notified
Product number: 7362
3-part Contus slide-bearing
This foosball-bearing is amde out of 3 parts and suits for all 16mm bars. The designated bank-width for the Contus slide bearing is 25-30mm. This plastic-bearing is low maintenance and can be sued without oil or other lubricants. The bearing is delivered with suitable screws.
Details of the 3-part Contus slide-bearing:
- very rugged
- for 16mm rods
- bank-width approx. 25-30mm
- low maintenance
- including fitting screws
Measure:
total outer measure: 60mm
bearing outside: 36mm
bearing inside: 16,3mm
gap between screws: 48mm
7362
We also recommend
Notify me
L4-Contus Hollow Bar Lettner
Hollow bar by manufacturer Lettner The L4-Contus bars of Lettner are the best hollow bars nowadays. The cost-performance ratio is unbeatable. The hard chromium plated steel bar is used on ell Lettner tables and guarantees a very specific play. This bar was succesfully contested in a bar-testing and can easily keep up with the competitor. Details of the Lettener L4-Contus-hollow bar: hard chronium plated precision-bar integrated bar ending branded with sealing Measure: Ø 16mm approx. 1,2 kg
€23.90*
Notify me
Plastic handle bar 8-tuple flattened
Plastic foosball handel for 16mm bars The plastic handle bar 8-tuble flattened suits for all 16mm bars. It is similar to the Original Leonhart Soccer handle bar but is a little harder. Its ergonomical form fits very good into the players hands which provides a perfect playing experience. Measures: Ø: 33mm Length: 12cm
€1.80*
Notify me
Solid bumper with slide ring
Rubber bumper with inbuild slide ring for 16mm bars The new solid bumper with inbuild slide ring with it's perforated design allows high suspension properties and also contributes to the long life of the bumper. The bumper is rounded off by one slip plastic rings whose safe the bumper to the wall. We reccomend to use a extra slide ring between figure and bumper. The Dimensions of the solid bumper with inbuild slide ring: Outside diameter: 30mm Inside diameter: 16mm Thickness: 19mm Weight: 11g Suitable for: 16mm rods included: bumper including plastic ring
€1.49*
Suggested products
Notify me
Bearing key Tornado
Original bearing-key for Tornado foosball-tables You are able to set the bearings of the Tornado foosball table with this original Tornado bearing key. This key is pulled from the outside over the bar till the bearing and tightens or releases the bearing according to the direction. Measure: Weight : 50g
€8.90*
Notify me
4-hole slide bearing
Price-performance-winner The 4-hole slide bearing is made out of high-quality and soil-resisting nylon. It provides a perfect sliding performance and is similar to the Leonhart slide bearing. It suits perfect for self-built-foosball tables and fits for all 16mm bars. Measure: Ø Inside = 16,3 mm Ø Flange = 27,5 mm Ø Outside = 58 mm Depth = 13 mm Weight = 12,5 g
€1.20*
Notify me
Lettner Bearing incl. Screws
High quality bearing by manufacturer Lettner This two-part bearing of thermoplastic material has been developed especially for Lettner foosball tables. It can withstand even the toughest usages and always guarantees a good sliding of the rods. This design will be used for 16mm rods with a wall thickness of 25-30mm. Measures: Overall diameter (outer): 59.5 mm Bearing diameter (in): 16.4 mm Bearing diameter (outer): 27.5 mm Weight: 39g
€2.80*
Notify me
Bearing rosette Leonhart
Bearing rosette for Leonhart foosball tables The Leonhart bearing rosette serves as stop face of the rubber bump, so that the bar cannot go over the end. Furthermore, it is a optical dressing for the bearing holes and prevents a little bit from dust. This product is an original part from the firm Leonhart. It suits for the Leonhart slide-bearing. Measure: Ø Inside = 22 mm Ø Outside = 52 mm Thickness = 2 mm Weight = 3,8 g
€0.65*
Notify me
Slide Bearing Leonhart
High-quality slide-bearing for foosball tables by manufacturer Leonhart This foosball bearing for all Leonhart- and Löwen-Tables is made of high class nylon. It is often used for changeovers from ball bearings to professionel bearings, because it is easy to mount, no matter which size the wall thickness of the table is. Besides, you also need a bearing rosette, which you can also find in this category. Measure: Ø Inside = 16,3 mm Ø Flange = 27,5 mm Ø Outside = 58 mm Depth = 13 mm Weight = 12,5 g
€2.20*
Notify me
Lettner teflon-bearing
Teflon-slide bearing made by Lettner The 2-part Lettner teflon-bearing provides very fluent gliding of the rod. The bearing can be used without oil or any other lubricant. It is non-soiling and the needed screws are inluceded. Suits for all 16mm bars.
€4.90*
Notify me
Tornado bearing
Rugged slide bearing for Tornado foosball tables Tornado slide bearing is composed of the nut and both bearing cups for 15,9mm Tornado hollow bars. All three necessary parts are in delivery. The bearing is extremly robust and stands even rough play. Measure of the Tornado bearing: Ø Inside = 16,15 mm Ø bore hole = 39,2 mm
€8.15*
Many variants
Notify me
3-Hole slide bearing
Color: Black
Standard bearing for all 16mm rods The 3-hole bearing causes minimal bar-wear and gets the bars up to top speed. Fits all 16mm bars. This bearing is a low priced alternative to the Leonhart bearings as the distance from the screw-holes to the hole centre is a little bit shorter. Due to this, we suggest the original product for changeovers. Besides, you also need a bearing rosette which you can find in this catergory as well. Measure: Ø Inside = 16 mm Ø Flange = 25,5 mm Ø Outside = 53 mm Depth = 8,5 mm Weight = 9,5 g
€0.85*