Vector III
slide 2 of 6
safe shopping
Selected variant:Corpus color: Black
Vector 3 foosball table with 125kg!
The Vector III tournament foosball table is produced in Germany and provides high-quality material as well as a very good playing-experience. Its high weight (125kg) suits very good for an intense utilization of ambitious players. The Vector III has a very good price-performance-ratio and is 100% made in Germany!
Details of the Vector 3:
- corpus is made out of 27mm multiplex-board
- corpus is strenghened with additional weight
- surrounding PVC-edges provide additional security
- grippy playfield made out of 19mm laminate, melamine-coated
- seamless lifted corners
- white inside-banks for more brightness
- welded metal leg-construction (optinal shorted table legs)
- height-adjustable feed
- 16mm Contus hollow bars
- Contus bearings
- Contus JetSpin handles
- original soccer figures
- 2 contus joker balls included
The corpus is pre-assembled. Only the legs, figures and bars have to be installed.
Optional:
- 3rd ball ejection
- shorted table legs
- Figure colors (blue, red, black, white, green, orange, grey)
- branding
Measure:
Length: 145 cm
Width: 74 cm (without bars)
ca. 130 cm (with bars)
Height: 91 cm
Playfield: 120 x 69 cm
Properties "Vector III"
| Handle: | round black |
|---|---|
| Rods: | hollow bar |
| Ball entry: | with ball entry |
| Corpus color: | Black |
| corpus: | assembled |
| Goal: | silent goal |
| Figures: | Soccer figure |
| Coin-op: | Ohne |
| Playfield: | resopalcovered playfield with seamlessly pulled up corners |
| Suitable for: | Teenager and adults |
| Weight: | 125 kg |
| Cover plate: | without glas cover |
| Bearing: | standard bearings |
| Bumper: | bumper with slide-ring |
| playing-field color: | green |
| playing-field markings: | with |
7231
Manual
We also recommend
slide 7 to 9 of 4
Notify me
Solid bumper with slide ring
Rubber bumper with inbuild slide ring for 16mm bars The new solid bumper with inbuild slide ring with it's perforated design allows high suspension properties and also contributes to the long life of the bumper. The bumper is rounded off by one slip plastic rings whose safe the bumper to the wall. We reccomend to use a extra slide ring between figure and bumper. The Dimensions of the solid bumper with inbuild slide ring: Outside diameter: 30mm Inside diameter: 16mm Thickness: 19mm Weight: 11g Suitable for: 16mm rods included: bumper including plastic ring
€1.49*
Kickerlight
Rugged foosball lamp for pros The new LED foosball lamp Kickerlight fits onto a lot of different foosball-modells such as: Leonhart, Garlando, Lettner, Ullirch, Bonzini or Vector tables and enlightens those perfectly. The lamp can be assambled without any glue or drilling. The light of the LEDs ensures the concentration and the provides a shadow-free enlightment of the table. Details of the LED-foosball lamp Kickerlight: ultra-slim design steady construction perfect enlightment of the table energy-saving LEDs free view onto the playing-surface and the opponent individual assambly for each table-model Measures: Power: ca. 12 W working voltage LEDs: 12V DC LED per Meter: 120 pcs Lightcolor: 6000k Weight: ca. 1,8kg Energy-efficiancy: A+ Color: anthracite including: power cable (230V)
€179.00*
Notify me
Leo Pro screw with nut (Allen)
New Allen-screw for foosball tables by Leonhart The Leonhart foosball screw with Inbus fits to every Leo Pro- and Soccer figure. The screw nut is included. Measure: Thread = Allen M4 Length = 26 mm Ø Head = 9 mm Weight = 5 g
€0.99*
Notify me
Soccer figure
DTFB-licensed Soccer Figure for many foosball tables The wide and fine formed foot of the Soccer Figure makes it easy to pin the ball and supports a specific game. This figure is a very good alternative and barely different to the trade mark figures. Furthermore it is used on the Vector foosball tables and is officially licensed by the DTFB. Measure of the Soccer figure: Height: 113 mm Rod-middle to footend: 72 mm Ø rods: 16 mm Weight: 46 g
€1.95*
Recently viewed
slide 1 of 1
Many variants
Notify me
Roberto Sport Kombat ITSF
Coin-op: Mechanischer Münzer | Cover plate: without glas cover
ITSF foosball table Roberto Sport Kombat with coin-op The Roberto Sport Kombat is the latest coin-operated version of the Adrenaline with ITSF-license. The good grip makes play very precise on this foosball table. The rough ball reduces the speed of the game, so that you get an great amusement. This table is not only for professional players but also for beginners. They learn fast the basic shots and passing techniques on this table. The table is delivered directly from stock. Details of the Roberto Sport Kombat: Accredited and labelled from the ITSF 18mm strong holllowbars with self-lubricating slide bearings Figures tightly placed onto the bars Playing field with plastic coating and lifted corners Two-piece corpus made with scratch-proof HPL coating Legs made of square tubes Extra metal plates in the corpus Keeper is not turnable around 360° License for all ITSF-Tournaments Coin-op (0,50?) (other coins on request) Measure: Length: 135 cm Width: 76 cm Height: 91 cm Playing field: 111x70,cm In delivery: 10 tournament balls Siliconespray for the bars
€1,099.00*
Similar products
slide 6 to 8 of 5
Many variants
Vector Inox
Model: Vector Inox 2
Outdoor foosball table for the whole year! This foosball table is made in Germany and suits very good for an outdoor usage. The Vector Inox brings a high-quality training experience and long-living material. The high weight suits very good for adults, children and teens. Due to the water and weather-proof material the Vector Inox suits perfectly for an outdoor utilization. All sparepars are made out of material which was originally used in shipbuilding. Details of the Vector Inox: corpus made out of 27mm multiplex-plate surrounding PVC-edges grippy playing-field seamless raised corners undestroyable goal 16mm Contus L4 hollow bars weather-proof tarpaulin welded, anodized leg-construction (optional shorted legs) 2 balls included figure Johnny (colors: red, yellow, deep blue, white) For more information please read our blog. The corpus is pre-assembled, only the legs, figures and bars have to be mounted. Measure: Length = 145 cm Width = 74 cm (without bars) ca. 130 cm (with bars) Height = 91 cm
€999.00*
Many variants
Branding for Vector foosball tables
Model: Vector II
Vector II foosball tables with individual branding The Vector II tournament foosball table is made in Germany provides a high-quality plaiyng-experience and long-living materials. The high weight of 70kg suits perfect for adults but also kids and teenagers. The Vector II has a very good price-performance-ratio. Details of the Vector II with branding: corpus made from 27mm thick 10-layer multiplex HPL-decor surrounding PVC-edges grippy playing-field seamlessly-raised edges white inner banks for more brightness leg-construction with PVC-feet undestroyable goal 16mm full-metal-bars Tournament PVC-handles Tournament Soccer figures (color overview) 2 ball-throw-in-shells Please find further information in our blog. Indivudalize your foosbll table. With a high-quality branding on your Vector foosball table. Design the side-, long- and surface-areas in 4c and design a unique piece of furniture. The corpus is pre-assembled, only the legs, figures and bars have to be mounted. Options: telescope-bars 3 ball-returns (with sea-saw) Measure: Length = 145 cm Width = 74 cm (without bars) ca. 130 cm (with bars) Height = 91 cm Weight = 70 kg
€1,149.00*
Many variants
Vector III
Corpus color: White
Vector 3 foosball table with 125kg! The Vector III tournament foosball table is produced in Germany and provides high-quality material as well as a very good playing-experience. Its high weight (125kg) suits very good for an intense utilization of ambitious players. The Vector III has a very good price-performance-ratio and is 100% made in Germany! Details of the Vector 3: corpus is made out of 27mm multiplex-board corpus is strenghened with additional weight surrounding PVC-edges provide additional security grippy playfield made out of 19mm laminate, melamine-coated seamless lifted corners white inside-banks for more brightness welded metal leg-construction (optinal shorted table legs) height-adjustable feed 16mm Contus hollow bars Contus bearings Contus JetSpin handles original soccer figures 2 contus joker balls included The corpus is pre-assembled. Only the legs, figures and bars have to be installed. Optional: 3rd ball ejection shorted table legs Figure colors (blue, red, black, white, green, orange, grey) branding Measure: Length: 145 cm Width: 74 cm (without bars) ca. 130 cm (with bars) Height: 91 cm Playfield: 120 x 69 cm
€948.00*
Many variants
Vector Pro
Corpus color: White
Vector Pro official licensed tournament foosball table (DTFB) The Vector Pro tournament foosball table equates to the Vector 3, which is produced in Germany as well. The Pro Version is equipped with the Contus rubber-bumper and soccer figures with warranty against breaking. The third and fourth ball ejection is included as well. The Vector Pro provides a high-quality playing experience as well as long-resistant material. The high weight of 135 kg this table suits perfectly for ambitious players who are looking for a real alternative to the original Leonhart or Lettner foosball tables. The Vector Pro has a very good price-performance-ratio and is manufactured in Germany. corpus made out of 27mm multiplex-board corpus is strenghened with extra weights surrounding PVC-edges provide additional security grippy playing-surface is made out of 19mm laminate coated in melamine seamles lifted corners white inner banks for more brightness 16mm hollow bars Contus jetspin handles Contus bearings Contus rubber-bumper Soccer figures with 2 years warranty against breaking (colors: red, blue, black, white, grey, yellow, orange, green) 4 ball ejections 2 ball-throw-in-shells welded legs with height adjustable feet 2 balls included The corpus is pre-assembled, only the legs, figures and bars have to be installed. Official license: Measure: Length: 145 cm Width: 74 cm (without bars) ca. 130 cm (with bars) Height: 91 cm Playfield: 120 x 69 cm
€1,098.00*
Many variants
Vector II
Rods: Massive rods | Corpus color: Black
Foosball table with a perfect price-performance-ratio The Vector II is a tournament foosball table and is made in Germany. Its high-quality and long-lasting material as well as the very good playing experience make the Vector II the perfect alternative to the famous manufacturers. Due to the high weight (70kg) this table can be played not only by children and teenagers but adults as well. The Vector II foosballtable has a very good price-performance-ratio. Details of the Vector II corpus is made out of 27mm multiplex-board surrounding PVC-edges protect from jars grippy playfield made out of 19mm laminated board melamin-coated seamless raised playfield-corners white inside banks for more brightness 16mm full metal bars tournament PVC handels tournament soccer figures welded, anodized leg-framework with PVC-feet (optional shorted table legs) unbreakable goal-insert 2 balls included The corpus is pre-assembled, only the legs, figures and bars have to be installed. Measure: Length = 145 cm Width = 74 cm (without bars) ca. 130 cm (with bars) Height = 91 cm
€749.00*
Customers also bought
slide 1 to 2 of 2
New
Many variants
Foosball Robertson Winspeed 32mm white/black 20g
Selection packaging unit: Set with 5 pieces
Winspeed table football balls bring colour into the game! For every table football player and football fan, there is now a huge selection of different kicker ball colours. Whether in the traditional black and white panel look or in the style of Barcelona/Bayern/Dortmund/Schalke - every foosball fan will find the right colours of their favourite club here. Unique production process. The Winspeed kicker balls are produced in a complex two-colour injection moulding process. In this process, the colours of the balls are not simply printed on, but the raw material is dyed accordingly. The raw material used is high-impact polystyrene, a thermoplastic that is particularly resistant to temperature and weathering. This production process makes the Winspeed soccer balls absolutely abrasion-resistant, extremely durable and colour-fast. The ball surface in the traditional football pattern is free of seams and injection moulding residues. Due to the smooth and fast ball surface, the Winspeed kicker ball has optimum running characteristics. This special, complicated production process of the Winspeed balls is registered as a patent and additionally registered as a trademark at the patent office. The ball weight of 24 grams is ideal and the ball diameter of 35 millimetres is the most popular tournament size. This means that the Winspeed kicker ball can be played on all standard foosball tables. Because of its versatility, the kicker ball is also ideal for use in the promotion sector. Individual colour combinations can be varied and produced separately on request. A generous selection of colour variations is immediately available from stock. Technical data Material: HIPS / High Impact Polystyrene. Product weight net 20.0g Diameter 32.0mm
€7.50*
New
Many variants
